ball type check valve

...ball type check valve factory The function of cast iron ball type check valves is to ensure that there will be no reverse flow in the pipeline. Specifications Ball type Check Valve range: 1.Production Size:1 1/2”-20” DN40-DN500mm 2.Pressure range:PN10,PN16,125LB,150LB Ball type check valve Standard: 1.Face to Face:DIN 3202 F6 2.Flange Standard: EN1092-2/BS4504 PN16,ASME B16.1 3.Testing Standard:EN12266 Ball type check valve

...ough a system opens the valve, while any reversal of flow will close the valve. Exact operation will vary depending on the type of Check valve mechanism. Most common types of Check valves are swing, lift (piston and ball), butterfly, stop and tilting-disk.

...Ball Check Valve Lift Check Valve Introudction The rubber ball adopts hollow steel ball and is attached with rubber with good elasticity, which can ensure the sealing and reduce the damage to the pipeline system during valve closing. When the valve is opened, the conical body with holes can fix the steel ball, eliminate the pressure on the contact surface between the rubber ball...

DIN PN16 PN25 PN40 WCB Body Stellite Overlay Disc Lift Type Check Valve DIN LIFT TYPE CHECK VALVE PN16/25/40 Face to Face:EN558-1 Flange End:EN1092-1 Test:EN12266 Technical parameters : Main Part Material Part ...

... and closes the spherical valve disc by means of the flow of the medium itself to prevent the medium from flowing backwards; Application Area: Petroleum, chemical, metallurgy, water treatment, etc. Product Features 1. The ball valve disc is closed quickly...

...tem. These valves are activated by the flowing material in the pipeline. Forged Steel Ball Check Valve VERVO forged steel Ball disc check valves are offered in lift type, bolted bonnet and welded bonnet design in a wide range of carbon, stainless steel,

... check valve and available in with two type configurations, i.e., Plug type and Ball type. These valves shall be bolted bonnet or welded bonnet type with full or standard bore options. These valves are non-return valves, which allows flow in one direction.

... the ball can slide up and down in the integrated chute in the body to open or close the valve without any noise and water-hammering and good sealing capability The bore is full without any block so the flow rate is much with little resisting force and

...Ball Slide Check Valve For Sewage Pipeline Use Product introduction: The HQ41X ball side check valve adopts a rubber wrapped rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body, thereby opening or closing the valve. It has good sealing performance, noise reduction, and no water hammer. The valve...

... plate, valve stem and spring and other important parts, and the use of thin lightweight design.Because the closing stroke of the valve plate is shortened and the spring action can accelerate the closing effect, water hammer and water hammer sound can be

...full-ported valve seat is uniquely designed allowing the ball to seat leak-tight without getting wedge into the valve seat. For vacuum or anti-flooding valve application, a "floating" rather than "sinking" ball is used. Due to its simple flow efficient and

...type check valve / Spring check valve Sanitary check valves are specifically used for the food handling and processing industries to prevent backflow of product. Commonly used with liquid products, spring check valves are designed to assist closure pressure to create a positive shutoff Specification Product Name: SS304 Clamp type check valve / Spring check valve Valve...

...single direction. The main purpose of check valves is to prevent the flow in reverse direction which would othervise cause the system or equipment to damage, partially or completely,causing a major setback. Check valves are applicable in systems such as

...Type Check Valve / Wafer Flapper Check Valve DN15 ~DN1200 Swing Type Check Valve Application: The Check valve is used for preventing the back-going of medium in pipelines and equipments, and the pressure of medium will bring the result of opening and closing automatically. When the medium is back-going, valve disc will automaticaly closed to avoid accidents. Swing Type Check Valve...

... Type Check Valve DN100 PN40 A check valve, clack valve, non-return valve or one-way valve is a valve that normally allows fluid (liquid or gas) to flow through it in only one direction. A swing check valve or tilting disc check valve is check valve in ...

Low Noise Tilting Type Check Valve Safety Relief Pressure Regulator Product Overview: Foowell Tilting Type Check Valve has small flow resistance can save energy; They main advantage is overcome the other types check valve under the operating conditions of ...

... and Bonnet Connection Class1500LB check valves are both for bolted bonnet and pressure seal bonnet. 3. Cover Gasket Style Metal ring gasket Pressure seal cover / bonnet design. 4. Seat For carbon steel check valve, the seat is usually forged steel. The